WEDIC CARDIO EM · Wearable 12-lead ECG Device
From Hospital Testing to Holter Monitoring with a Single Sensor Module
CARDIO EM is a wearable ECG device that works as a standard 12-lead electrocardiograph when docked in its cradle and as a body-worn Holter monitor when fitted into its holder. Measured signals are reviewed and analyzed in the dedicated CARDIO Pro software.
48.4 × 57.0 × 13.0 mm / 41 g sensor module
Single-lead · 6-lead · 12-lead ECG
Up to 72 hours of continuous operation, IPX7 water and dust resistance
Test Modes
Configure It for Any Testing Environment
Simply connect the same sensor module to a different cradle, holder, or electrodes. One device handles both standard bedside testing in hospitals and long-term recording during daily life.
Standard 12-Lead ECG Test
With the cradle and 12-lead measurement cable, it is compatible with hospitals' existing disposable patch electrodes.
Holter 12-Lead ECG Test
Attach the holder to disposable 12-lead Holter electrodes for long-term continuous recording.
Holter 6-Lead ECG Test
Easy to wear with the holder, limb electrode cable, and medical fixation tape.
Electrode System
Hospital-Compatible Cables and Healthrian Disposable Patch Electrodes
Cables + disposable electrodes for standard 12-lead testing
A system compatible with the disposable patch electrodes already used for 12-lead ECG testing, designed for ECG exams in hospitals.
Reusable sensor module · cradle · 12-lead measurement cable
Disposable patch electrodes ×10
Disposable patch electrodes for Holter testing
Disposable electrodes developed by Healthrian with cost-efficiency and hygiene in mind, easy for anyone to wear.
Reusable sensor module · holder · limb electrode cable
Disposable 6-lead fixation tape or 12-lead Holter electrodes, patch electrodes ×4
Components
CARDIO EM Package Contents
CARDIO EM ECG sensor module
Cradle for ECG measurement and charging
Standard 12-lead ECG measurement cable
Holter holder · Holter limb electrode cable
Medical tape for 6-lead Holter fixation · disposable 12-lead Holter electrodes
Disposable electrodes for ECG measurement (shared)
CARDIO Pro ECG measurement and recording software
Specifications
WEDIC CARDIO EM
MFDS · GMP · IEC
Product
Product Name
Electrocardiograph
Product License No.
—
Sensor Module Dimensions
48.4 × 57.0 × 13.0mm
Sensor Module Weight
41g
Measured Signals
Single-lead, 6-lead, 12-lead ECG
Water and Dust Resistance
IPX7
Connectivity
Bluetooth Low Energy (BLE)
Battery
3.7Vdc, 900mAh
Max. Continuous Operating Time
72 hours
Charging
USB-C (5Vdc, 500mA)
Software
System Requirements
Android 8.0+ / iOS 13.0+ / Windows 10+ / macOS 12.0+
Performance
Sensitivity
10mm/mV
Input Impedance
2.5 MΩ or more
Linearity and Dynamic Range
Within ±5 mV
Common-Mode Rejection Ratio
105 dB or more
Frequency Response
0.08Hz – 131Hz
Sampling Rate
500 samples/s, 4K samples/s
Resolution
24bit
Heart Rate Accuracy
Within ±3% or 3 BPM, whichever is greater, over 30–260 BPM
Waveform Amplitude and Interval Measurement
PR interval, QRS duration, QT interval, QTc interval, R axis, and more
ECG Analysis
Rhythm and beat analysis for arrhythmias, including normal sinus rhythm, atrial fibrillation or flutter, bradycardia, tachycardia, supraventricular premature contractions, and ventricular premature contractions
Inquire About Adoption and Supply
Healthrian's business team responds directly to product inquiries from hospitals, health screening centers, and distribution partners.